How to do waterproof work in solar street light factory

Lamp head: The sealing of the lamp head must be passed. The waterproof treatment of the lamp head of the solar street lamp factory can ensure the service life of the street lamp. Therefore, the choice of the shell of the street lamp is very important.

Controller: When choosing, you must pay attention to whether the style has waterproof performance. For the controller, it is usually placed inside the road when it is installed, so as to better avoid the wind and the sun.

Battery: It must have a certain degree of waterproof performance. For the installation of the battery, the battery is buried in the ground, about 40 cm away, so as to avoid flooding.

It is necessary to test the solar street light head to see if the street light is on normally. If it is on, it can be used normally. If not, it needs to be replaced. The light pole should be hot-dip galvanized to ensure that the surface is smooth, without chromatic aberration, without pinholes, and without skin peeling after use.

1. It will not go out suddenly: The solar street light uses the solar energy absorbed by the sun as the energy source. When the sun comes out, the battery is charged. When the environment is dim to a certain extent, the battery will provide the electricity for the street lighting to operate, so it will not work. The lights turn off suddenly. The solar street light uses a DC power supply, and there is only a very small chance that a problem will occur. If there is a problem with the solar battery, it will not suddenly turn off the lights, but will gradually dim in the following period of time. . At this time, increase the quality inspection of solar street lights to avoid unnecessary losses.

2. The quality of LED light source: The light source of solar street lights generally uses LED lamp caps, because LED lamp caps have many advantages, long lighting life (about 50,000 hours), and will not emit excessive heat during use. , which greatly prolongs the service life of the light source.

3. It can also be used normally in several consecutive cloudy and rainy days: the solar street light uses solar energy to generate electricity, so it can also perform normal lighting work on days without sunlight. The solar street light manufacturers will also consider these issues when designing the solar street light. Through communication with customers, the solar street light factory will configure suitable street light accessories according to the local rainy weather conditions given by the customer to solve the problem. It can also work in the most continuous cloudy and rainy days in the local area, and there will be no situation where there is no electricity and lights out.