How to ensure the sealing of battery components during the assembly process of solar street lights?

As a green energy source without any pollution, solar street lights are very suitable for road lighting, especially in areas without power supply or where it is difficult to lay power lines. This is mainly due to the credit of the battery components of the solar street light, which can convert sufficient light energy into electrical energy. Therefore, for the entire solar street light, the quality of the battery components also determines the quality of the solar street light. The lighting solar street lamp manufacturers will briefly introduce to you about the assembly and packaging of solar street lamps: Assembly of solar street lamp battery components. The reliability of solar cells depends to a large extent on its ability to prevent corrosion, wind, he, rain, etc., and its potential main problems are the sealing of the edge and the junction box on the back of the module. The packaging methods of solar cells mainly include: Double-sided glass sealing and glass alloy laminated sealing. Double-sided glass sealing: The front and back sides of the solar cell module are glass plates, and the solar cells are embedded in a layer of polymer. One of the main problems with this sealing method is the connection between the glass plate and the junction box. , this connection has to go through the edge of the glass plate, because punching holes in the glass plate is expensive. Borui alloy laminated sealing: The front of this component is a glass plate, and the back is a layer of alloy flakes. The alloy flakes mainly play the role of moisture-proof and anti-fouling. The solar cells are embedded in a layer of polymer. In this solar cell module, the battery and the junction box can be directly connected with wires. For details, please log in: www.chz-lighting.com.