Installation points of solar street light poles

Check to determine whether the pole type of the solar street light pole is correct (such as single-ended, double-ended), and match the corresponding length of the jumper arm; cut the appropriate wire to the corresponding position, and generally reserve 150MM at both ends of the stripped wire. Install the jumper and lamp head, determine the position and level of the lamp, and take the lamp pole as the benchmark. After wiring, check whether the light wire is fastened firmly. Connect the light source and threading, connect the wires correctly according to the instructions, pay attention to the positive and negative poles. After connecting the wires, check that the connection is secure. During the installation of the light source, pay attention to the fact that the light projection surface of the light source should be perpendicular to the ground, not the surface of the installed jumper arm. After connecting the light source, first use a multimeter to test its resistance and whether it is grounded with the rod body, and then use the battery to test the light to confirm that the connection is correct. Changhui Lighting solar street lights combine fashion, economy and high-end into the design of lighting products, constantly improve product value, guide the trend of life and manufacture avant-garde products. In the design, Changhui adheres to the design of fashionable products; the design of energy-saving and environmentally friendly products; the design of products that are safe and not harmful to health; the design of creative products that guide people's life trends. Changhui Lighting welcomes new and old customers to visit us!