Solar street light construction components installation and test plan

In addition to ensuring the good installation of the components during the construction of the solar street light project, it is also very important to do a good job of testing each component. In order to realize the good construction of the solar street light project, how to carry out reasonable construction and testing to realize the good operation of the solar street light?

Construction and installation steps of solar street lights:

1. Fix the components: first fix the light pole, bracket and arm, then fix the solar energy on the solar panel bracket, and fix the lamp cap on the arm;

2. In the process of lifting and installing the light pole, the flange screws should be fixed, and the sun angle deviation of the photovoltaic module should be adjusted;

3. After completing the fixed installation of each component, follow the wiring instructions on the component to connect the wiring, and pay attention to the wiring terminals not to be wrongly connected or reversed to avoid errors;

Solar street light installation and commissioning:

In order to achieve the good work of the solar energy system, after the installation of the solar street light, the system needs to be debugged: loosen the battery panel connection on the controller and the light is on, otherwise the light is off; then carefully observe the change of the controller indicator light before everything is normal Perform controller sealing.

With the ongoing construction of solar street lights in road projects, the stable and reliable work of solar street lights can only be achieved when solar street lights are installed according to the installation steps.