Wiring problems of solar street lights in components and vertical lights

The wiring of solar street lights in components and vertical lights is a big question. The following are some precautions for the installation and wiring of solar lights compiled by Xiaobian: When installing solar cell modules, handle with care, and it is strictly forbidden to short-circuit the solar cell modules. The power cord and the junction box, the light pole and the threading part of the solar cell module are sealed with silicone, and the solar cell module connection wire needs to be firmly fixed at the bracket to prevent the power cord from sagging or pulling for a long time. When installing the lamp head and light source, handle it with care to ensure that the light-transmitting cover is clean and free of scratches. When moving the battery, do not touch the battery terminals and safety valve, and it is strictly forbidden to short-circuit or roll the battery. When wiring, pay attention to the positive and negative poles, and it is strictly forbidden to connect them in reverse. Do not touch the positive and negative poles of solar cell modules and batteries at the same time to prevent electric shock. Avoid scratching the lamp body during installation. The bolt connections of the lamp holder, lamp arm, upper lamp pole assembly, and solar cell assembly are firmly connected without loosening. Guards must be added when installing solar cell modules. The galvanized hole of the light pole is sealed with the sealing device or silica gel matched with the light pole, and pay attention to the appearance.