How do solar street lamp manufacturers ensure the quality in the production process of street lamps

As a new light source for road lighting, solar street lights integrate light, electricity, machinery, control and other technologies in the production process, as long as the working mode of the system is set, it will work automatically. In order to ensure the quality of street lamps, solar street lamp manufacturers must carry out detailed and scientific optimization design and ensure the quality of solar cell components, light sources and other components in the production process to achieve good road lighting.

In order to ensure the quality of solar street lights, first do a good job of electrostatic protection before welding the LED light source, put on the static ring, apply thermal grease, make sure to apply evenly when applying thermal grease, ensure heat dissipation, solder the lamp beads, and then inspect Whether the solder joints have missing soldering, desoldering, and virtual soldering, whether the welding slag on the board surface is cleaned, check whether the lamp bead and the aluminum substrate are in place, whether there is any hanging phenomenon, if it is hanging, it needs to be re-welded to ensure maximum heat dissipation .

In the battery selection, in order to ensure the quality of the battery, batteries with the same or similar performance should be combined during street lamp production, so they should be classified according to their performance parameters; battery testing means testing the battery’s output parameters (current and Voltage) to classify it. In order to improve the utilization rate of the battery, make qualified battery components.

For the current development of road lighting, solar street lamp manufacturers can only achieve good and high-quality road lighting by ensuring the production quality of each component of the street lamp in the street lamp production process.