Solar street lamp battery testing and battery panel performance requirements

Inspection and maintenance of solar street lamp battery components: 1. Keep the battery room clean, prevent dust from entering, keep the room dry and well ventilated, and have a certain waterproof performance. The battery should be fully charged when the battery is charged for the first time. The actual capacity of the battery; 　　2. When maintaining the battery, the maintenance personnel should wear protective glasses and body protection equipment, and use insulated equipment to prevent electric shocks and short-circuit and disconnection of the battery; 　　3. When the battery is used normally, be careful not to use any organic Use solvent to clean the battery. Never remove the safety valve of the battery or add any substance to the battery. Charge the battery as soon as possible after discharge to avoid affecting the battery capacity. The solar street light battery panel components must meet the basic performance requirements: 　　 1. The overall solar street light pole can provide enough strength to make the solar panel components withstand hurricanes, etc., the installation and use process of shock, vibration and other stresses, can be Withstand the impact of hail; 　　2, has good airtightness, can prevent wind, water, and isolate the corrosion of solar cells under atmospheric conditions; 　　3, has good insulation properties, and has strong ability to resist ultraviolet radiation; 　　4, working voltage It can be designed according to different requirements with output power, and can provide a variety of wiring methods to meet different voltage, current and power output requirements; 　　5. The solar cell is connected reliably, so that the efficiency loss caused by the solar cell string and the associated combination is small; 6. Long working life requires solar cell modules to be used for more than 20 years under natural conditions, and the packaging cost is as low as possible under the conditions mentioned above.